Separate names with a comma.
Began making a new console which would have included a hardtop, electronics box and rod holders for our 26 open. If anyone can use it you are...
Cleaning out the garage. Before this goes to the trash figured I would check to see If anyone could use a tackle center that was removed from the...
Steve, On another thread about the Minn Kota Ulterra mounted on a 24 open you mentioned going with the 112/72 Terrova due to the bow rail. How...
Not sure of the model but maybe you can tell by the photos. I took this off the boat last August, didn’t want to loose any of the season so bought...
When the center console boats were built was it ever considered to make the flip up seat in front of the console a part of console itself and have...
Marina put the boat in today, she fired right up and ran great on the 1/2 hour run back to my dock from idle up to 3500 rpm. Temp was a steady...
We had a new teak swim platform built over the winter and will be applying finish over the next week or so. We had considered using teak oil but...
Does anyone know how tall a pilot house is from the roof top to the deck and what the inside height is? Thanks, Mark
[ATTACH] [ATTACH] Looking for suggestions on where to find top mount brackets for a swim platform. We have a teak platform but need mounts. I...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] I was at the NYC boat show and noticed the Steiger Craft vendor was using a transom as their display booth. It...
[ATTACH] If anyone has use for a tackle center from a 26’ open this one is free for pickup. It was removed from the front of the center console to...
[ATTACH] [ATTACH] Looking for recommendations for wiring a Powerwinch 31 class windlass, We want to finish the switch wiring to get ready for...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] It took a while but she’s in the water after a major refit including new tanks, fuel lines, exhaust, complete...
Is there an adjustment for rack steering? The rack is straight, not rotary with 3 1/2 turns stop to stop. With the wheel centered the rudder is...
We have what we believe to be an Indmar 351W in our 1990 26’. My best guess is that it is the original engine with the risers replaced. Would...
Two questions on a 1987 20’ open. 1. Would the swim platform on a 20’ open bolt directly up to a 26’ open or is the curve of the transom...
Attached is a wiring diagram that we will be using for our rewiring project. We would appreciate any feed back or suggestions. Most of the...