Separate names with a comma.
Is the part number for all shamrock tanks
Any one happen to know the rds part for replacement tanks?
1985 26' predator
Is this something still done by west marine and what is the process?
(I understand that this is an old thread but I used the search feature)
As of right know I can't even get a spark plug wire off let alone anything else. I have a plug wire puller that I will try.
It looks like I bolts...
I would prefer not to cut the floor drains is there another way to replace the plugs and wires with removing the exhaust riders and manifolds?...
The motor was put together by rapido Marine in Florida.
They have a rating of 4.2 on Google.
The cam is facing the engine.
I have verified that it oriented correctly.
The pump may be old and worn out.
I am upgrading to a Johnson f6b9...
Here is my firing order.
Does number 1 need to be at the very top of the distributor? I am not sure if the distributor needs to be...
The links here aren't working anymore, I would like to verify the firing order of my 351w.
Can someone post the recommended firing order for a ford 351w.
I don't mind checking it again. I would like to rule that out completely.
The firing order was checked and matched up with a 1994 351w. This was done a few weeks back. I believe that the timing is off and will have that...
It would not draw from a bucket sitting on the deck with a 50 foot water hose. I am not sure if the hose was too long.
Is it possible to update the links. The Sherwood G series how to would be extremely helpful for me
Here are some more pictures of the Sherwood pump before it was installed.
I don't see the metal plate in some of the other pumps online not sure...
I will run it in a bucket and mark the bucket at 1" intervals. How long should it take to empty a 5 gallon bucket?
I have included some pictures of the Sherwood pump with the top hose disconnected. it looks to be correct based on the picture above. The...
New Ford 351 with GT40 heads
The impellor is new and the pump is pumping water, (Sherwood pump G-21 or G21)
The impellor has been installed twice...
Accel universal coil installed July 6th.
Motor installed around same time
Key on I get a buzz and rpm guage reads 1000 rpms with engine off.
No external breaker.
Distributor looks like a generic unit.